••••• M.•••••
OBJECTIVE
To continue learning and gaining knowledge in all respective aspects of the technical/ mechanical trade, while not limiting myself to any advancement opportunities that would further advance my career.
SUMMARY OF QUALIFICATIONS
&#•••••; 4 years of commercial Refrigeration, heating/AC, and energy Management experience.
&#•••••; 2 year experience in Building Maintenance in an industrial setting as electrician and extrusion maintenance technician.
&#•••••; Knowledge and initiative to follow all safety procedures and wear all appropriate safety attire as required by OSHA standards (including Arc-Flash protective uniforms, lock-out/tag-out, man lift, fork lift, and split tail(crown lift) training.
&#•••••; Have been employed by a participator in VPP (Voluntary Protection Program) to assure employees Aware, Anticipate, and Act to prevent on the job casualties.
&#•••••; Ability to work as a team or as an individual.
&#•••••; Experience working with most make and model Residential/ Commercial split and packaged Heat& A/C units.
&#•••••; Trained to work and service Hussman and Tyler Refrigeration equipment for supermarket refrigeration systems.
&#•••••; Familiar with Danfoss and ComTrol Rack refrigeration controls.
&#•••••; Familiar with single and •••••phase electrical systems, installing and troubleshooting. Able to work with wide range of equipment such as HVAC/R, presses, fabrication machinery, belt and direct-drive motors, control circuits, and lighting systems.
&#•••••; Capable of sizing power source capacities including wire and conduit size, ampacities and proper installation with power supplies ranging from ••••• VAC single phase to ••••• VAC •••••phase. Also worked with DC drive motors and drive such as Quantum 3 drives and Bronco II drives.
&#•••••; Knowledge of mechanical and electrical components of pneumatically equipment as well as cylinders, solenoids, regulators and MAC valves.
&#•••••; Good knowledge of control circuit systems with pressure, temperature, time-delay, and safety shut off switches.
&#•••••; Training with air-acetylene and oxy-acetylene torches and uses with brazing/soldering tips and cutting tips. Also basic skills with mig welders and plasma cutters, ice blasters, sand blasters, hydraulic shop presses, band saws, chop saws, drill presses, sanders, grinders, and some experience with lathes and mills.
&#•••••; Able to run forklifts, scissor lifts, man lifts, split-tail lifts and gradalls.
&#•••••; EPA Universal Certification to handle recover, reclaim, and properly dispose of CFC, HCFC, and HFC refrigerants.
&#•••••; Good communication, teamwork and customer service skills.
&#•••••; Highly motivated and compliant.
&#•••••; Strong desire to continue learning and advancing skills sets in mechanical/technical know how serviceability, as well as any other skills or information to better aide my career.
WORK OF EXPERIENCE
Ply Gem Industries ( Variform Inc.) Martinsburg, WV ••••• Extrusion Maintenance Technician
&#•••••; Maintaining production operations of an industrial vinyl siding manufacturer.
&#•••••; Working in chemical blend plant for chemical mixtures for siding including pneumatic valves, silo maintaining, heat and cool mixers, and PLC controlled processing.
&#•••••; On-call line mechanic position with limited time to troubleshoot and repair equipment to keep production running in fast-paced environment.
&#•••••; Responsible for rebuilding self-contained equipment that is offline, cleaning and repairing sheet and cutter dies, fabricating various parts for replacement, and performing maintenance on offline equipment to have for replacement.
&#•••••; VPP (Voluntary Protection Program) participant with extensive and up-to-date safety training with lock-out/tag-out training, certified forklift, split tail(crown) lift, and man lift training.
&#•••••; Working with •••••/••••• Phase circuits and DC drives such as Quantum 3 drives on motors ranging from ••••• HP.
&#•••••; Responsible for working solo on night shift, but not limited to assisting any member or production or materials handling to assure all production requirement are met.•••••
Gaumer Industries Chambersburg, PA
Electrician and Maintenance/Fabrication Technician
&#•••••; Troubleshooting, installing, repairing/replacing single and three phase electrical runs, equipment and systems and control circuits.
&#•••••; Working with flat bar, angle iron, rod iron, rigid pipe, and sheet metal
&#•••••; Running various types of machinery for fabrication such as drill presses, spring presses, band saw, overhead cranes and jigs, and most power and hand tools.
&#•••••; Hanging conduit of various sizes and pulling correct wire sizing for all types of equipment and applications.
&#•••••; Designing control circuits for Heating systems.
Tuckey Mechanical Carlisle, PA
Installation Technician
&#•••••; Installing slip and drive duct systems, insulating and hanging split and packaged A/C units.
&#•••••; Worked with multiple hand and power tools.
&#•••••; Temp job through Aerotek, laid off after Chambersburg project was completed.
Refrigeration Services Inc. Hagerstown, MD
Service and Installation Technician
&#•••••; Troubleshooting, repairing/replacing commercial sized refrigeration equipment in mostly supermarket settings.
&#•••••; Working with complex mechanical and electrical systems.
&#•••••; Trained to work on Heat Reclaim/ Recovery Systems
&#•••••; Trained with Energy Management Systems
Other work experience and relating skill sets available on application.
EDUCATION
•••••/•••••/••••• York Technical Institute
York, Pennsylvania
Diploma for Heating, Air Conditioning and Refrigeration Technology
&#•••••; Academic Honors with ••••• GPA
&#•••••; Trained in four separate courses from mechanics/electrical, heating, refrigeration, and air conditioning.
••••• •••••/•••••/••••• Waynesboro Senior High School
Waynesboro, Pennsylvania
Graduate With High School Diploma
&#•••••; Graduated with ••••• GPA
EXTRACURRICULAR ACTIVITIES
I enjoy staying active by working out at the gym or my home, following professional football and hockey, and learning about any new technology or taking classes to further better my knowledge and aide the advancement of my career.
REFERENCES
John Funk Fayetteville, PA •••••
Co-Worker at Gaumer Industries
Brian Stoner: Falling Waters, WVA •••••
Previous Co-Worker at Refrigeration Services
John Gadomski Inwood, WVA •••••
Current Co-worker at PlyGem Industries
