Aerospace Engineer

••••• •••••
•••••, Anthony, Ks. •••••
Home •••••
E-mail •••••

CATIA V5
CATIA V•••••
NASTRAN
PDM CMI VAS COMOK MSRPII
DOORS ICA QADDS SFM eJDS
Excel, Word, Power Point, Outlook


••••• to ••••• Lockheed Aeronautics, Fort Worth, Texas
Engineer Specialist-
F••••• Completions Assy Liaison Engineering,
Floor Support for completions and final,
QAR Dispositioning, MRB Support, Rapid Prototyping
and Tool Design for structures repair. Tool Design
FDMs for out-of-station location of subassemblies.
Initiating Problem Reports, Cause and Corrective Action.

••••• to ••••• Lockheed Aeronautics, Fort Worth, Texas
Mechanical Systems Engineer -
F••••• JSF On-Board Oxygen System Desing and Installation,
Canopy Pressure Seal and Anti-G Suit Pressurization,
Environmental Systems Design, ECS Ducting Installations,
Material Review Board Modifications and Redesign,
Design Coordination of Structures and Harness Routings

••••• to ••••• Gulfstream Aerospace, Savannah, Georgia
Mechanical Systems Engineer -
Special Missions, Crew & Equipment CAEW Program
Avionics Equipment Racks and Secondary Structures
Power Supply/Distribution, Inboard - Offboard A/C
Ground Equipment Support Instl, ••••• HZ Converter Instl.,
GIV-X, JAA Certification, Landing Gear Tire Burst
Analysis of Systems & Structures. G••••• Flight Deck
Redesign Layouts, Avionics Installation Layouts and
Design Studies using Honeywell and Rockwell Collins
Avionic Packages, GIV, GV SATCOM Instl., GV Wide
Body - Flight Deck Layouts. Cabin Pressure System Design.

••••• to ••••• Lockheed Aeronautics, Fort Worth, Texas
Engineering Analyst -
Design Integration Analyst, F••••• COMOK
Engineering Analysis of Electronic Mock-ups and Datasets,
Wire Harness Re-Routing, Engineering Design Support.

••••• to ••••• Gulfstream Aerospace, Savannah, Georgia
Mechanical Systems Engineer -
Hydraulics / Landing Gear
GIV Landing Gear and Brake Systems,
GV Hydraulic Systems, Iron Bird Design,
Engine Driven Pump & Hydraulic Reservoir
Design and Testing, Power Transfer Unit
Design and testing, Bleed Air Systems Testing.
Exerimental Ground Support Equipment Design,
Flight Test Set-up & Analysis, FAA Certification Reports.

••••• to ••••• Eaton Aeroquip Co., Gilching, Germany
Mechanical Systems Engineer -
Fairchild Dornier - model •••••
Landing Gear and Hydraulic Systems
Design & Layout of Landing Gear,
Hydraulics and Components.

••••• to ••••• Cessna Aircraft Co., Wichita, Kansas
•••••Mechanical Systems Engineer -
Environmental Control Systems,
Flight Deck Layout and Design
Advance Design Airframe & Interior
Project Engineer
Design and Assembly of Full Scale Fuselage Mock-up for
Environmental Systems Testing
Design and Assembly of 4 Full Scale Fuselage Mock-ups
of Interior Cabin & Cockpit

••••• to ••••• Boeing Aircraft Co., Wichita, Kansas
•••••Structures Engineer -
••••• Digital PreAssembly, Cargo Floors
••••• Digital PreAssembly, Fuselage Structures,
Passenger and Cargo Floors
••••• Sustaining Engineering, Flight Deck.

••••• to ••••• General Dynamics - Convair, Fountain Valley, Ca.
Procurement Quality Assurance Rep.,
Douglas Aircraft Co. - Quality Liaison
F••••• Assemblies and Installation
ROHR Industries - Senior Field Quality Specialist
Patriot Missile Program,
ISO••••• Audits and Vendor Approval Audits

••••• to ••••• Boeing Aircraft Co., Wichita, Kansas
•••••Tool Design Engineer
••••• FAJs & Picture Frame Jigs Cargo Door Panel,
2 Story Heavy Floor Structures having
Hydraulic Actuator Controls and 2 story Scaffolding.
••••• FAJ Cargo Door Seal Plate and
Entry Floor & Hold Down Structures.
••••• FAJs Strut and Nacelles RR, GE, P&W Engines.

••••• to ••••• Vendor Surveillance Corp., Irvine, California
Senior Field PQAR (Procurement Quality Assurance Rep.)
ISO••••• Audits and Vendor Approval Audits,
ROHR Industries,
Senior Field Specialist - Patriot Missile Program
United Technologies, Space Shuttle Engine Sensors.

••••• to ••••• GEC-MARCONI, Midwest Div., Wellington, Kansas
•••••Civil Inspector
Aircraft Systems, Assemblies & Tooling.
Raytheon Army RC•••••K, Piaggio P••••• Avanti,
McDonnell Douglas N••••• NOTAR Helicopter.

••••• to ••••• General Dynamics, Convair Div.,Fountain Valley,Ca.•••••Tool Design Engineer / Offsite Tooling Coordinator
Israeli F••••• Cockpit & Canopy FAJs , MD•••••, MD•••••

••••• to ••••• Avcon Industries, Newton, Kansas
•••••Supervisor - Aircraft Modifications
Falcon ••••• Cargo Modification, cargo door, floors,
tracks, frames, liner, systems, avionic racks, etc.
Lear Jet, Model ••••• Laser Sensoring Systems Instl.
Rocket Launcher Systems Installations.
ECM (Electronic Counter Measure) Systems Instl.

••••• to ••••• QMI Aerospace Corp., Wichita, Kansas
•••••Production Manager - Aircraft Assemblies
DC••••• Hush Kits, KC••••• Ailerons, Flaps,
Slats, Fuel Pods,
KC••••• Thrust Reversers, Engine Cowlings,
Bypass Ducts, F••••• landing gear doors

NOTE:
Where dates overlap, the jobs listed were worked simultaneously.
For more details, or further past employment, please call or email.