••••• (Clay) ••••• ••••• Katy, Tx. ••••• Hm. ••••• Cell (•••••) ••••• E-Mail: •••••
OBJECTIVE: To secure a position with a stable company where I can utilize my extensive experience.
SUMMARY: Over the past ••••• years, I have acquired extensive experience in supervision, millwright, and various other crafts such as machine shop, pipefitting, welding, and reading mechanical, structural, pipe and pneumatic prints. . Also have experience in shop and field repairs and installations of turbines, pumps, and gearboxes and other types of industrial rotating equipment to OEM specifications. . QC/QA management established API-Q•••••C / ISO Certification Program as a Management Representative.
EDUCATION: Doughtery High School, Albany, Ga., ••••• graduate Georgia Institute of Technology, Albany, Ga., - Loom Machinist ••••• San Jacinto College, Pasadena Texas Millwright II ••••• Champion, Inc. Houston Tx-Rotating Equipment & Mechanical Seal ••••• Caterpillar G••••• Series Engine School, Houston Tx. ••••• Hanover Screw Compressor School, Houston Tx. ••••• Hanover Lubrication and Oil Analysis, Houston Tx. ••••• Certified with the National Centers National Craft Assessment and Certification Program for Millwrights in Feb. ••••• Certified with Saudi Aramco, Riyadh, S.A. Industrial Mechanical Instructor •••••
EXPERIENCE: 7/••••• - Present Texas International Oilfield Tools Houston Texas
Quality Control & Safety Manager
Managed Oilfield tool manufacturing facility as a Quality Control & Safety Manager. Establish API Certification Program through Internal and API audits. Set facility departmental Work Procedures to API Q1 & 8C Specification along with ISO ••••• & ISO/TS ••••• requirements. Maintained calibration certificates, NCRs, Corrective Actions, and Inspection Documentation as a Management Representative. Started and establish Safety Program that is OSHA Compliant and is monitored by a Third Party. Held weekly Safety Meeting with management and shop personnel.
6/•••••/••••• Aerotek Energy Services Houston Tx. Turbine Tech. I worked as a contractor to the Wood Group Company (light industrial turbine) thorough Aerotech Energy Services. Work from a back log of Solar turbine units. Saturn, Taurus and Centaur C•••••, C•••••, C••••• and C••••• Overhauled turbine engines with inspections that involved visual, plus dimensional with record keeping. Checking rotors, casings, liners, all components of a turbine. Likewise the same tolerances and procedures were used in the reassemble of the turbine. Finally the turbine than is installed in a test cell to a dino and tested.
4/••••• 6/••••• Dresser Rand (Leading Edge Turbine Technologies) Houston Tx. Turbine Tech. Have experience with working on Frame 3,5,7, ••••• and various other gas turbines and compressors. Work included detailed inspections and photographs of incoming equipment. Followed by a thorough disassembly and record documentation of dimensional and runouts checks of different gas turbine components with tolerances of ••••• Reassemblies of these turbines and compressors were conducted under the same close tolerances as required by Dresser Rand and the OEM. Also worked on some V•••••, V•••••, V••••• centrifugal compressors. Returned bearing journals. Disassembled compressor and turbine wheels and blades to get ready for reassembly that would be followed up with balancing and runout checks.
2/••••• to 9/••••• SEC PRODUCT & SERVICES Houston Tx. Service Tech. I have done overhauls of different natural gas powered engines from Caterpillar •••••,•••••, •••••, ••••• and CM. These engines are the power force that runs a skid mounted compressor or generator. That were also major and or minor overhauled. I also established an inventory ordering and control system to maintain support for service dept.
9/••••• 2/••••• DXP Houston TX. Shop Assembly and Repair Leadman Worked on repairs and assembly of a wide range pumps, gear boxes, and blowers and vacuum pump. These involved equipment that was OEM warranties and different types such as gear pumps, diaphragm pump, positive displacement pump and compressors, centurial pump, gearboxes
1/•••••/••••• Elliott Turbomachinery HoustonTx.
Re built and overhauled various size and types of turbines, Gas and Steam and Compressors units. Deblading rotors, inspections, reassembly were done. Frame 5 and 7 rotors.
•••••/•••••/••••• Temporary various contracts Mechanical Millwright Since 8/••••• I have done a number of various temporary contracts assignments for different Temporary agencies. Work varied from manufacturing shut-downs to assembly of compressor packages.
2/••••• 7/••••• Al Hoty Est. Al Khobar, Saudi Arabia Industrial Mechanical Instructor Contracted to teach at Saudi Aramco in their Training and Career Development Center in Riyadh, Saudi Arabia. Responsible for teaching mechanical rotating equipment in a variety of industrial cases which included pumps, compressors to turbines, etc. These classes covered levels of training from the most basic to the advance courses. Curriculum topics covered safety, tool usages, identification of equipment and component parts and their functions, with proper teachings of equipment specification settings and procedures of disassembly and assembly of a wide variety of rotating equipment. Skills taught included identifying with total understanding of precision tools, and machine shop equipment and tooling. This involved field with in shop and classroom inspections. These courses covered field diagnostic troubleshooting with equipment component failure recognition. Due to the curriculum levels being taught, the student attendance ranged from engineers to Aramco plant employees
4/•••••/••••• Skillmasters Houston TX.
Maintenance Millwright Contracted to RPM services of Houston TX to do a maintenance contract at Sterling Chemical in Texas City to fill in for union plant personal that were locked out by Sterling Chemical. Task included troubleshooting of rotating equipment as in pumps, gearbox, steam turbine etc Replacing mechanical seals, fixing old motor and pump bases to gain tolerances of mechanical alignments, also did monthly and semi- annual inspections and test of different critical plant equipment.
8/•••••/••••• Skillmasters Houston TX. Gas Turbine overhaul Technician Contracted to Alstom Powers U.S.A. to overhaul, inspect, and reassemble twenty••••• series gas Turbine engines for a Mexico Power Company. Task included disassembly, inspection and documentation of all parts, reconditioning of parts and reassembly of engines to Alstom spects.
QUALIFICATIONS: Experienced maintenance, millwright, field service and classroom teaching with ••••• years of on the site experience and supervision (foreman, general foreman and superintendent). Have studied mechanical Millwright classes and attended a number of mechanical foreman seminars. Supervised the entire mechanical operation for major contractors of a variety of projects including plastic plants, waste treatment plants, powerhouses and numerous other industrial complexes. Experience also extends into the oilfield industry that required working under difficult and restrictive conditions in various and extremely remote locations in mostly third world countries that demanded cultural understanding and communications. Responsibilities and liabilities in the international area have required decision making and problem solving dealing with problems that arise that have complexities due to the remoteness of the projects locations and availability of parts, materials and equipment. These challenges were resolved to maintain the obligations and support of contract production quotas and goals for the client. Supervision and training of crews, mechanical apprentices, journeymen and foreman. Coordinating mechanical requirements of the job with all other subcontractors, QC/QA involvement established API-Q•••••C / ISO Certification Program as a Management Representative. Ordering expending materials, dealing with inspectors, general contractors and project official Accountable for total control of all mechanical aspects of the job requiring day-to-day supervision, quality, safety, and employee labor relations. Experience in wide variety of projects from simple systems updates to the most complex jobs taken from the ground level to final completion in industrial maintenance. Communicate effectively on a daily basis with engineers and clients in interpreting drawings and modifications designs.
COMMENT : Letters of recommendations at request.