per diem machinist

Highlights

Machine Operation and Repair Experience

Own all Necessary Tools for Machine Operation/Repair

Skilled with use of Manual/CNC Machines

Excellent Safety Record


Experience

Machine Maintenance:
Took apart machines to find problem. Ordered new part or parts, repaired and put back together. Troubleshot machine making sure it ran in good order. Set-up machine for operation according to print. Unloaded new machines, set them on show floor, set them up for machine shows operation. Ordered needed parts and fixed to be sold to manufacturers. Set-up and operated Tornos Swiss •••••axis bar feeder ENC •••••, also repaired Harding jet split lathe.

Machine Operation:
Responsible for set-up of all machines operating that day.

Load all the tools that were needed in that operation, and edit all the tools to the right settings. Would also do all my own QC on parts that would be operating that day.

If part sizes would change would edit the machine to get the right size. Would change my own tooling during that operation if broke or got dull. Would also use manual machines for operation.

Change the tooling, sharpen all my own tooling and run parts to print types of machines that I have ran. moriseki with live tooling also tnm••••• as well as tnm••••• bar feeder with live tooling swisstornos with 7 axis live tooling as well as most moriseki mills as well ascicinatti lathes with multiple spindles I have ran these types of machines on and off during my career.


Employment

PMG ••••• - Current
Title: Contractor
Have contracted in two locations thus far: New Jersey and Washington as a Millwright/Journeymen Machinist.

Executive Consulting 7/••••• - •••••/•••••
Title: Vertical Lathe Machinist
Machine Types: GNL Vertical with Fanuc controls,
Operation, Temporary Status Milwaukee Gear, Contract ran out. Operation ran raw castings to make gears for U.S. Navy, diameter varied from •••••" to •••••" raw castings to make gears. Tolerances varied from ••••• to ••••• complete operations.




K.H.S., Brookfield WI 5/•••••/•••••
Title: Lead Machinist
Machine Types: VTL Bullard, 2 VTN ••••• Monarch Vertical Lathes with a •••••" and a •••••" table
Controls: Fanuc and Manual
Materials: Inconel, Stainless Steel, Cobalt, and Titanium
Responsibilities: Do set-up and operate all machines for aerospace parts. Would write sub-programs for jobs, also would run the CNCs manually to machine part, when unable to run from program, would do all edits in program for new operations, and keep very tight tolerance.

HANARD MACHINE, INC., Salem, OR •••••/••••• May •••••
Title: Lead Machinist
Machine Types: VTL Bullard, 2 VTN ••••• Monarch Vertical Lathes with a •••••" and a •••••" table
Controls: Fanuc and Manual
Materials: Inconel, Stainless Steel, Cobalt, and Titanium
Responsibilities: Do set-up and operate all machines for aerospace parts. Would write sub-programs for jobs, also would run the CNCs manually to machine part, when unable to run from program, would do all edits in program for new operations, and keep very tight tolerance.

TICE INDUSTRIES, Portland, OR •••••/•••••/•••••
Title: Machinist
Machine Types: 2 Bridgeport Mills, 2 Nakamura, CNC Lathe, 2 Nakamura CNC Mills, 2 Cadilac Engine Lathes
Controls: Fanuc and Manual
Materials: Stainless Steel, Soft Steel, Aluminum, Bronze, and Brass
Responsibilities: Operate and set-up all machines for short and long operations. Edit programs, write sub-programs, and change all off-sets accordingly. Very tight tolerances.

OWENS INDUSTRIES, Oak Creek, WI •••••/•••••/•••••
Title: Lead Machinist and Maintenance
Machine Types: 2 Swiss, Tornos, 7 Axis, Screw Barfeeder, Seimen Lath
Controls: Fanuc, Seimen
Materials: Cobalt, Titanium, Inconel, Nickel, Stainless Steel, and i•••••
Responsibilities: Operate and set-up all three machines for aerospace parts, small and large. Very tight tolerances. Would also repair machines if they were broken down.

ALSIDE ENTERPRISE, Salem, OR •••••
Title: Lead Machinist
Machine Types: 1 Bridgeport Mill, 1 Hardinge Lathe
Controls: Manual
Materials: Aluminum and Brass
Responsibilities: Operate and set-up both mill and lathe for small operations.

•••••S MACHINES, Milwaukee, WI •••••
Title: Owner/Machinist
Machine Types: 1 Bridgeport Mill and 2 Cadiliac Lathes
Controls: Manual
Materials: Stainless Steel, Soft Steel, and Aluminum
Responsibilities: Ran all phases of the manufacturing for myself. Set-up, operate, and repair manual mills and lathes for small operations.

SUMMARY

Desired Salary/Wage: ••••• USD Per Hour
Current Career Level: Manager (Manager/Supervisor of Staff)
Years of relevant work experience: 7+ to ••••• Years
Date of Availability: Immediately


WORK STATUS:
.
Active Security Clearance yes
TARGET JOB:
Target Job Title: Manager/Supervisor
Alternate Target Job Title: Machinist
Desired Job Type: Employee
Desired Status: Full-Time
Willing to work the following shifts:
First Shift (day) Second Shift (afternoon)
Willing to work weekends: Yes

TARGET COMPANY:
Category: Manufacturing and Production
Industry: Manufacturing- Other

TARGET LOCATIONS:
EXPERIENCE:
Present PCC Corporation; lead machinist

EDUCATION:
•••••/••••• Milwaukee School of Engineering
US-WI-Milwaukee; Associate Degree, studied machine design and repair

LANGUAGES:
Language Proficiency Level
Italian Basic - Familiar